Grundfos UNILIFT AP50.50.08.A1V Dirty and waste water pumps 96010584
Maximum flow rate: 24984 l/h | H max: 9 m | Pump casing: stainless steel | Maximum installation depth: 2 m | Media temperature range: 0 ... 55 °C | Nominal current: 5.9 A
=> Note: The product image is for illustration purposes only. Please use the description for identification.
Buy Profluid Shop online at low prices – for larger orders or volume discounts, please contact us for a customized quote. This offer is exclusively for commercial customers.
Grundfos UNILIFT AP50.50.08.A1V 96010584 Submersible wastewater pumps
Product code: 96010584
EAN Number: 5700390515799
Submersible drainage pump type
Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection.
The pump is fitted with suction strainer and level switch for automatic start and stop.
The impeller is a VORTEX impeller for 50 mm free passage suitable for pumping groundwater, surface water, rain water and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.
The pump is ready for use as it is fitted with carrying handle and is supplied with a 5 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.
| Product information | EAN number | 5700390515799 |
| Product No | 96010584 | |
| Flow rate | Approvals | CE,RCM,VDE,LGABG,EAC,TUVRHWID,MORO,UKCA,SEPRO |
| Max. Particle | 50 mm | |
| Maximum flow | 6.94 l/s | |
| Maximum head | 9 m | |
| Type of impeller | VORTEX | |
| Electrical data | Built-in motor protection | CONTACT |
| Capacitor size - run | 16 µF/400 V | |
| Cos phi - power factor | 0.99 | |
| Enclosure class (IEC 34-5) | IP68 | |
| Insulation class (IEC 85) | F | |
| Length of power cable | 5 m | |
| Mains frequency | 50 Hz | |
| Motor type 1-phase | PSC | |
| Power input P1 | 1.3 kW | |
| Rated current | 5.9 A | |
| Rated power - P2 | 0.8 kW | |
| Rated speed | 2790 1/min | |
| Rated voltage | 1 x 230 V | |
| Thermal protec | internal | |
| Type of cable plug | SCHUKO | |
| Installation | Inst dry/wet | D/S |
| Maximum installation depth | 2 m | |
| Place of installation | Indoor | |
| Range of ambient temperature | 0 .. 55 °C | |
| Size of connection | 2 inch | |
| Type of connection | Rp | |
| Fluid | Density | 998.2 kg/m³ |
| Liquid temperature range | 0 .. 55 °C | |
| Selected liquid temperature | 20 °C | |
| Materials | CABLE_UNION_MATR_ASTM | C35330 |
| CABLE_UNION_MATR_EN | CW602N | |
| Cable union | Brass | |
| IMPELLER_MATR_QLTY_EN | EN 1.4301 | |
| IMPELLER_MATR_QUALITY_ASTM | AISI 304 | |
| Impeller | Stainless steel | |
| PH_MATR_QUALITY_ASTM | AISI 304 | |
| PH_MATR_QUALITY_EN | EN 1.4301 | |
| Pump housing | Stainless steel | |
| Control | Level switch | A |
| Other information | Environmental approvals | WEEE |
| Gross weight | 16.2 kg | |
| Herkunftsland | ||
| Net weight | 15.9 kg | |
| Zolltarif Nr. | 84137021 |